HOW RESET DRUM PAGE COUNTER ON A DELL 1710/1710N LASER PRINTER

How to Reset the Drum Page Counter on a Dell 1710/1710n Laser Printer ?, After replacing the imaging drum in a Dell printer, the "change drum light images" can remain flashing as if the printer does not recognize a new drum is installed. Another imaging drum can be inserted to see if the first was bad, but it is likely that the drum page counter needs to be restored. These instructions are not provided in the user manual and can be frustrating to carry out exactly like the printer. It may take several attempts to persevere for the time and you are going to print again soon.

Instructions

Tools:
Dell printer 1710/1710n
Restoration of the page against the drum

1 Toggle switch on the back of the printer. Turn off the printer.
2 Front door opened Hold down the Next button to open the door. Then turn on the printer.
3 Keep the Go button pressed until only the "LED" error is release. Close the door.
4 The Continue button, Ready / Data, Toner Low, and loads of paper all the LEDs are lit.
5 Press the "Cancel" button a few times to cycle through the LEDs until only the "toner low LED lights.
6 Press and hold the Next button until the LEDs cycle through and release the LED stops when toner low.
7 Turn the printer off and back.

Tag: How to Reset the Drum Page Counter on a Dell 1710/1710n Laser Printer